Arbortech Trench Blades: Leave The Shovel In The Shed

TL;DR

Before you orderOffer from Amazon

Get kitchen gear delivered free with Prime

• Fast, free delivery on millions of items
• Prime Video, Amazon Music and more included
• Member-only deals all year

Start your free Prime trial →Free trial for eligible customers · Cancel anytime

As an affiliate, we earn on qualifying purchases.Hide

Arbortech’s 200X Trench Blades are an attachment for its AS200Z corded and BA200X cordless Allsaw tools, intended for narrow trenches in grass and soil. Pro Tool Reviews reports a published cutting depth of up to 9 inches, a 1.2-inch trench width and a six-pack price of $99; the blades are not universal attachments or replacements for heavy-duty trenching equipment.

Arbortech’s 200X Trench Blades give owners of the company’s Allsaw tools an attachment for cutting narrow trenches through grass and soil, according to a report by Pro Tool Reviews. The blades are designed for irrigation, cable and landscape-lighting work, with a published cutting depth of up to 9 inches and a width of 1.2 inches.

The attachment is compatible with Arbortech’s AS200Z corded Allsaw and BA200X cordless Allsaw. Pro Tool Reviews says it is not a universal blade for reciprocating saws, angle grinders or other standard tools, so the accessory is relevant only to people who already own one of the specified Allsaw models or are considering that platform.

The report lists the blades in a six-pack for $99, available directly from Arbortech. It describes them as suited to narrow groundwork rather than as a substitute for a larger trenching machine. The stated dimensions indicate the blade’s published capacity; the report does not provide independent test results or a measured comparison with hand digging.

Pro Tool Reviews places the trench blades among a wider set of Allsaw accessories, including a turf blade, a wood blade for roots and embedded branches, and an XL general-purpose blade for harder material below the surface. That lineup could let some users adapt one tool to several landscaping and restoration tasks, though the source does not quantify time savings, performance or operating costs.

A Narrower Option for Allsaw Owners

The practical appeal is less manual digging for short, narrow runs such as irrigation lines, low-voltage cable or landscape lighting. For grounds-care and landscaping professionals who already use a compatible Allsaw, the attachment adds a dedicated task to an existing tool platform rather than requiring a separate trenching machine for every small job.

That potential convenience has limits. The listed 1.2-inch width and 9-inch maximum depth describe a particular kind of shallow trench, not every utility installation. Required burial depths can vary by location and by what is being installed. Pro Tool Reviews cautions readers to check local codes; the blade’s published dimensions alone do not establish that a trench will meet applicable requirements.

Where the 200X Fits in Allsaw

Pro Tool Reviews frames the accessory around a familiar small-scale job: routing an irrigation line or cable across a property can involve a long stretch of hand digging. The publication’s discussion focuses on using the Allsaw for that kind of work, rather than claiming the blade is suitable for major excavation or every underground installation.

The report also references an earlier Pro Tool Reviews assessment of the Allsaw. Editor-in-Chief Kenny Koehler described watching an internet installer dig a roughly 50-foot route by hand and said the Allsaw might have completed the trench in minutes with less effort. That was his illustration of possible benefit, not a reported timed test of the 200X blades. The supplied material does not give a launch date, independent performance measurements or a comparison against other trenching tools.

“With the ALLSAW, he would have had the trench done in minutes with far less effort.”

— Kenny Koehler, Pro Tool Reviews editor-in-chief

Performance and Burial Rules Vary

The source supplies product specifications and an editorial assessment, but it does not report independent testing, cutting speed across different soil types, battery runtime, blade life or the effort needed to operate the tool. It is also unclear from the supplied report when the attachment became available and whether the $99 price applies in all markets.

Most importantly, the published maximum depth does not confirm that a trench will be deep enough for a particular cable or irrigation line. Requirements depend on the installation and local rules. Buyers should verify compatibility with their exact tool model and check applicable codes before using the blades for a utility run.

Check Fit, Price and Local Requirements

Readers considering the accessory can confirm current availability and pricing with Arbortech, then check that they own a listed compatible tool: the AS200Z or BA200X. Before cutting, they should identify the intended line, confirm the required burial depth under local rules and establish that the proposed trench dimensions suit the installation.

The supplied report does not identify a forthcoming test, release milestone or further company announcement. Further clarity on real-world performance would depend on independent testing across soil conditions and on details from Arbortech about availability and use limits.

Key Questions

Which tools work with the Arbortech 200X Trench Blades?

According to Pro Tool Reviews, they are compatible with the Arbortech AS200Z corded Allsaw and BA200X cordless Allsaw. They are not described as universal attachments for other saws or grinders.

How wide and deep can the blades cut?

The published specifications cited in the report are a trench width of 1.2 inches and cutting depth of up to 9 inches. Actual results may depend on conditions, and those figures do not determine required burial depth.

What jobs are the blades intended for?

The report identifies shallow runs for irrigation, cable and landscape lighting through grass and soil. It does not present them as a replacement for heavy-duty trenching machinery.

How much do the blades cost?

Pro Tool Reviews lists a six-pack at $99, available directly through Arbortech. The report does not specify whether that price varies by market or retailer.

Can the 9-inch depth be used for any cable installation?

No. The report advises checking local codes, since required burial depths vary by installation. The published maximum blade depth does not confirm compliance with a particular rule.

Source: rss